Modern Printing Techniques for Enhancing the Printability Performance of Synthetic Textile Materials Via Different Treatment Methods

Othman, Hanan; El-Bahrawy, Ghadeer A.; Ezat, Hager A.; Moawaed, Samira S.; Abd El-Rahman, Reham; Abdelraouff, Aya; El-Desoky, Salsabiel S.; Hassabo, Ahmed G.

doi:10.21608/jtcps.2023.220585.1200

Modern Printing Techniques for Enhancing the Printability Performance of Synthetic Textile Materials Via Different Treatment Methods

Document Type : Original Article

Authors

¹ Benha, Egypt

² Benha University, Faculty of Applied Arts, Printing, Dyeing and Finishing Department, Benha, Egypt

³ National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt

10.21608/jtcps.2023.220585.1200

Abstract

polymeric substrates are increasingly prevalent. Commercially accessible polymers include polyvinyl chloride (PVC), polyethylene terephthalate (PET) and polypropylene (PP) Surfaces have less polar functional group density. As a result, these materials' adhesive properties are subpar by nature. As a result, creating a high-quality print on such polymer substrates has become difficult. Surface modification is now required for such surfaces as a result. The study covers the effect of different treatments dose on printability and the degree of surface modification. polymeric substrates are increasingly prevalent. Commercially accessible polymers include polyvinyl chloride (PVC), polyethylene terephthalate (PET) and polypropylene (PP) Surfaces have less polar functional group density. As a result, these materials' adhesive properties are subpar by nature. As a result, creating a high-quality print on such polymer substrates has become difficult. Surface modification is now required for such surfaces as a result. The study covers the effect of different treatments dose on printability and the degree of surface modification.

Keywords